L1-type smoothness indicators based weighted essentially nonoscillatory scheme for Hamilton-Jacobi equations

This article presents an improved fifth-order finite difference weighted essentially nonoscillatory (WENO) scheme to solve Hamilton-Jacobi equations. A new type of nonlinear weights is introduced with the construction of local smoothness indicators on each local stencil that are measured with the help of generalized undivided differences in L¹-norm. A novel global smoothness measurement is also constructed with the help of local measurements from its linear combination. Numerical experiments are conducted in one- and two-dimensions to demonstrate the performance enhancement, resolution power, numerical accuracy for the proposed scheme, and compared it with the classical WENO scheme.     

基于SWT方法的钢绞线索微动疲劳特性分析

为得到钢绞线索丝间接触区的应力场分布并预测微动疲劳裂纹萌生位置和微动疲劳寿命，本文利用参数化方法建立了精细化的钢绞线拉索有限元模型，包括整索模型和不同层丝间接触区域的局部精细化子模型．分析了钢绞线索在两种交变荷载工况下的应力场变化情况，并基于多轴疲劳SWT(Smith-Watson-Topper)临界平面法进行了疲劳特性分析和疲劳寿命预测．主要结论如下：钢绞线索内接触区边缘处的微动幅值较大，中心处几乎没有相对滑动，微动疲劳的初始裂纹萌生点位于接触区域边缘；经不同区域子模型分析比较，在轴向循环荷载作用下，外层钢丝的接触区域比内层钢丝更易发生微动疲劳损伤；在横向位移循环荷载作用下，同层钢丝因位置角度不同而产生了较大的疲劳特性差异，且相比轴向循环拉伸，该工况下最不利单丝的微动疲劳寿命更低；与非接触区域相比，接触区的疲劳寿命大幅降低，微动现象对钢绞线索的抗疲劳性能有明显降低作用．     

Hardy和Littlewood的一个三角和

本文对Hardy和Littlewood考虑的一个有限三角和做了进一步地研究.通过充分运用Chebyshev多项式和M?bius函数的性质,建立了该有限三角和的一个有趣的恒等式,并得到了一个精确的渐近公式.     

The Roper resonance in a finite volume

We calculate the energy levels corresponding to the Roper resonance based on a two-flavor chiral effective Lagrangian for pions, nucleons, deltas, and the Roper resonance at the leading one-loop order. We show that the Roper mass can be extracted from these levels for lattice volumes of moderate size.     

基于改进格林元的压裂水平井动态分析方法

以建立高效的动态分析方法为出发点，以边单元作为求解点，改进传统的格林元方法，减少未知数和求解矩阵维度；并提出基于改进格林元的加密网格加密方法，保证考虑复杂裂缝网络的压裂水平井动态模拟的早期精度.退化模型与半解析解、数值模拟结果进行对比，验证本文基于加密网格的改进格林元方法的准确性和动态分析的高效性.最后进行动态响应的敏感性分析，结果表明：①格林元方法是一种高精度的动态模拟方法，将求解节点设置在网格的边上可以提高压裂水平井动态模拟的速度；②改进格林元方法的加密基于叠加原理，不需要通过插值近似，其求解精度高.在相同加密网格条件下，基于本文改进格林元方法的加密效果比有限差分加密效果更佳；③复杂裂缝导流能力、改造区渗透率提高倍数、改造区大小等参数对压裂水平井动态特征影响较大，在动态分析和参数反演时，应着重考虑这些因素的影响.     

Time-dependent Ginzburg–Landau equations for multi-gap superconductors

We numerically solve the time-dependent Ginzburg–Landau equations for two-gap superconductors using the finite-element technique. The real-time simulation shows that at low magnetic field, the vortices in small-size samples tend to form clusters or other disorder structures. When the sample size is large, stripes appear in the pattern. These results are in good agreement with the previous experimental observations of the intriguing anomalous vortex pattern, providing a reliable theoretical basis for the future applications of multi-gap superconductors.     

运用三维离散元技术模拟落锤撞击下奥克托今颗粒的点火燃烧过程

炸药颗粒的点火燃烧过程一直是人们关注的热点问题。近年来，三维离散元技术在中尺度观测颗粒材料的动力学过程中拥有显著优势。炸药燃烧属于颗粒材料的反应动力学，运用三维离散元技术(DM3)可以有效地观测炸药燃烧传播的过程。以奥克托今(HMX)颗粒为例，本文成功模拟并观测到了HMX颗粒的燃烧反应程度，确定了颗粒开始燃烧反应的时间，以及燃烧反应传播的时间。同时，结合落锤冲击颗粒的三维图像以及其表观压强和放热功率，得到了HMX颗粒燃烧反应、燃烧传播的整个反应动力学过程，包括颗粒在冲击加载下碎化塑性变形的过程，颗粒燃烧反应放热的过程，落锤回弹颗粒喷射的过程等。同时，进一步说明了尖顶颗粒更利于颗粒点火，平顶颗粒有抑制颗粒点火的能力。     

Potts models with magnetic field: Arithmetic,geometry, and computation

We give a sheaf theoretic interpretation of Potts models with external magnetic field, in terms of constructible sheaves and their Euler characteristics. We show that the polynomial countability question for the hypersurfaces defined by the vanishing of the partition function is affected by changes in the magnetic field: elementary examples suffice to see non-polynomially countable cases that become polynomially countable after a perturbation of the magnetic field. The same recursive formula for the Grothendieck classes, under edge-doubling operations, holds as in the case without magnetic field, but the closed formulae for specific examples like banana graphs differ in the presence of magnetic field. We give examples of computation of the Euler characteristic with compact support, for the set of real zeros, and find a similar exponential growth with the size of the graph. This can be viewed as a measure of topological and algorithmic complexity. We also consider the computational complexity question for evaluations of the polynomial, and show both tractable and NP-hard examples, using dynamic programming.     

Modification of an implicit approach based on nonstandard rules for structural dynamics analysis

The present study aims to modify a recently suggested implicit approach consisted of the approximate Euler method and closed-form exponential mapping (herein referred to as the Liu scheme) for the dynamic analysis of structures. Such modification has been developed based upon nonstandard rules. The equation of motion is formulated in the augmented dynamic space to apply the exponential mapping as a group preserving scheme. The formulation of the proposed method involves the hyperbolic sine and cosine functions. The method is therefore prone to divergence due to the behavior of the hyperbolic functions in structures with a high ratio of stiffness to mass. In the present study, to consider the properties of the structural equation into the formulation of the time step size and thereby avoid the divergence, a parameter, known as stability parameter, is thus derived from the exact solution of the equation of motion based on nonstandard rules. Embedding this parameter into the proposed method improves its stability. Afterward, for evaluating the performance of the proposed method, it is applied to several structures with different loading patterns while implemented in programing environment of the Matlab software. The results are compared to those of several commonly used numerical methods in structural applications. It is found that the proposed method has acceptable convergence and accuracy, and low time consumption compared to several commonly used methods. Furthermore, its stability is guaranteed by embedding the stability parameter into the proposed method.